The most convenient signage solution on the planet
Our sign bases are easy to deploy: just pound the sign post in, tip, and roll the base into place. They’re just as easy to relocate too. The low center of gravity in the base means they won’t tip over easily in the wind.
- Made in America with 100% Composite Recycled Materials
- Won’t chip, crack, crumble, or corrode
- Install, remove, and relocate with ease
RUBBERFORM SIGN BASES
DELIVER WHAT MATTERS MOST:
SIMPLE SUSTAINABLE SIGNAGE
Parking Safety
Made Super Simple
Most parking lot signage is driven straight into asphalt or poured concrete. Any alteration, even something as simple as facing the sign a different way, requires demolition and repouring concrete. Even then, it will eventually crack and crumble and need replacement anyway.
RubberForm portable sign bases are blessedly convenient. Tipping and rolling them into place is so easy your grandparents could do it. We engineered them this way on purpose, so anyone on your team could deploy or remove them as needed.
Whether you use them for parking lot signage or curbside pickup, your needs will change. Our sign bases make it easy for your signage to change too. They’re easy to move but hard to break. Our 100% recycled composite material won’t chip, crack, crumble, or corrode no matter the heat, cold, or extreme weather.
Fill out the quote request on the right to see just how simple parking safety can be!
DURABLE
We innovated a special recycled rubber for our Rubberform sign bases that won’t warp, spall, crack, or crumble, no matter the heat, cold, or inclement weather.
CONVENIENT
Our sign bases install easily: just tip them over and roll into place. Removal and relocation is just as simple. You don’t need any heavy equipment or a large crew.
AMERICAN
We design and manufacture all our products in Western New York using all American-sourced recycled materials. You can keep your tax dollars in America and clean up our shared backyard!
FREQUENTLY ASKED
What’s the difference between your sign base and the plastic one I’ve seen for sale elsewhere?
The plastic knock-off you’ve seen is blow-molded, thin-walled plastic. That saves a lot of money for the manufacturer, but means it will break the first time it tips over or is ever so gently nudged by a vehicle. It also can crack open the first time it freezes, even without any collision. Our sign base won’t tip over even in heavy wind, and won’t chip, crack, crumble, or corrode in extreme weather or due to vehicle collision.
How portable are your sign bases?
They’re so easy to move your grandparents could do it. Simply tip the base over on its bottom side edge and roll it into position (that’s why our base is round!). Grab the top of the signpost and push/roll it into the top of the base. If you need a cart to move, we have two sign base carts: one for our 72-pound sign base and another for our 150-pound sign base w/base weight. No need for mounted wheels that will eventually rust or break off.
I need a heavier base than 72 lbs. for a high-wind area.
We have an add-on sign base weight for a total of 150 pounds (with the sign post). It also creates a wider base, making it less likely to tip.
Does your sign base come in colors?
We only make our sign base in black. However, we offer thermoformed plastic covers in safety yellow or handicap blue (as well as custom colors with a minimum order, depending on color) that snap right on top of the sign base for higher visibility.
What kind of sign posts can I use with your sign bases?
We have 2 signpost hole sizes: a 1-¾” perforated square sign post, and a 2-⅜“ round Schedule 40 thickness plastic post (or aluminum post with a minimum order, since we don’t normally stock them). We can also accommodate round posts smaller than 2-⅜“, just ask.
What post height do you recommend?
We recommend a 5’ signpost. This cuts down on the wind shear that might tip the sign base over in higher wind areas. If you require a taller post, we advise adding our 75-pound sign base weight that attaches to the bottom of our 72-pound sign base; this added sign base weight will enable you to go up to the MUCTD height of 7’ or 8’. You should also use a metal post for this application as plastic may flex in the wind.
What is the minimum quantity I can order?
Just one sign base! We can ship a boxed sign base out via FedEx or UPS ground to any location or up to 20 sign bases per pallet (bulk-packed, not boxed) via common carrier–LTL. We’ve also fabricated custom pallets for special orders, just ask!
What is the turnaround time to ship your sign base?
Our sign bases are usually in stock on the shelf and can be shipped out the following business day. Larger orders (greater than 1,000 sign bases) will take longer. Let us know your timetables and we’ll work to accommodate your delivery needs.
How many sign bases fit on a pallet?
We can ship up to 20 sign bases per pallet via common carrier–LTL (bulk-packed, not boxed).
Why are your sign bases round instead of octagonal?
Two reasons: our round sign bases can be rolled on their side, which is why we call them portable. Octagonal sign bases can’t. But our round design is also more stable in high-wind conditions. The center of gravity is lower than any octagonal design we’ve seen. In side-by-side comparisons some of our customers have actually done, the round sign base always stays upright longer in heavy wind.
Get a Quote
"*" indicates required fields
