The simplest spill containment on the planet
Our Spill Containment Berms are blessedly easy to install. We do all the fabrication before we ship it to you, so all you’ll need is a tape measure, a drill, a caulk gun, and one hand tied behind your back.
- Made in America with 100% Composite Recycled Materials
- Won’t chip, crack, crumble, or corrode
- Turnkey spill containment solution
RUBBERFORM SPILL CONTAINMENT BERMS
DELIVER WHAT MATTERS MOST:
SIMPLE, SUSTAINABLE SAFETY
The Simplest Way
to Contain Spills
Poured concrete spill containment is okay until it cracks or you need to make a change. Then you have to call in a demolition crew before you can install a new one.
RubberForm Spill Containment Berms are a breeze to install and require no heavy equipment or large crews. Remove and relocate them without any demolition, so your spill containment can change easily as your needs change.
All we need to get started are the dimensions of the spill area. If you need help determining those, see the spill containment regulations.
We also have drive-over spill containment berms available.
Fill out the quote request on the right to see just how simple spill containment can be!
DURABLE
We innovated a special recycled composite material for our Rubberform Spill Containment Berms that won’t warp, spall, crack, or crumble, no matter the heat or cold.
CONVENIENT
Our Spill Containment Berms install, remove, and relocate hassle-free. We do all the fabrication before we ship to your site. All you need is a tape measure, a drill, and a caulk gun.
AMERICAN
We design and manufacture all our products in Western New York using all American-sourced recycled materials. You can keep your tax dollars in America and clean up our shared backyard!
FREQUENTLY ASKED
What liquids will your spill berms contain?
RubberForm uses recycled TPV rubberized plastic for our spill berm. Our customers have tested it with water, oil, diesel fuel, phosphoric acid, nitric acid, hydraulic oil, and food-grade oil, among others. RubberForm has free of charge self-certification spill berm testing kits so your team can self-certify that your liquid will not penetrate the TPV. Just ask and we’ll send you one.
What do you need to get started?
For simple layouts, we just need dimensions. For more complex situations, we’ll need a sketch, schematic, or drawing. We’ll then send you a CAD drawing to sign off on before we start fabrication.
Do we need to bolt and apply sealant for your spill berm?
Yes, you must bolt and apply sealant when installing our spill berms for a proper seal. Not all surfaces are level, and the sealant should fill in the holes or gaps on the surface. Bolting it down increases the mechanical strength of the whole berm structure.
Which height spill berm do I need?
The EPA/DEC have guidelines for this: the SPCC – Spill Containment Counter Measure requirement. Based on this, you need to contain 110% of the stored liquids on premise, 110% of the largest container in a specific area, or 10% of all the containers in a specific area. Please consult with a qualified SPCC engineer specialist to make sure your company is compliant.
What if I need to drive in and out of the containment area?
We have a drive-over spill containment berm that can be used by itself or in conjunction with our standard spill containment berms.
What is the turnaround time for these spill berms?
It depends on the spill berm type, size, complexity, and the amount of fabrication we will be doing in our factory. Most orders are fabricated and shipped in a matter of days after receiving the approved drawing.
What size of spill containment berms does RubberForm offer?
We offer 2”, 4”, 6”, and 8” spill containment berms (as well as drive-over options).
Do I have to cut or drill your spill berm after it arrives?
No, we do all the fabrication for you. You send us your sketch, schematic, or drawing, and we’ll provide a CAD drawing for you to approve. We’ll send installation instructions too. All you have to do is drill into the floor where the berm will be installed and apply the sealant.
Get a Quote
"*" indicates required fields
