• Parking Lot Safety

Bollard Covers

Product Description

RubberForm Plastic Bollard Covers are one step toward the best-looking parking lot for miles around. They take the bleak industrial look of concrete-filled and steel bollard posts and make them look fresh and new when you slide on RubberForm’s Bollard Sleeve.

Choose a cover that complements your company colors for an excellent branded customer experience from parking to purchase. Our bollard covers are easy to install and just as simple to replace as they age and get marred from vehicle hits.

Add to quote

Specifications:

Bollard Post Sizes

  • 4″ Diameter (4.700″ ID) x 52″ Long
  • 4″ Diameter (4.700″ ID) x 60″ Long
  • 4″ Diameter (4.700″ ID) x 64″ Long
  • 7” Diameter (7.125” ID) x 52” Long
  • 7” Diameter (7.125” ID) x 60” Long
  • 7” Diameter (7.125” ID) x 72” Long

Post Diameter Measures = Bollard Post Cover Needed

  • Fits 4” nominal steel pipe, all schedules (4.500” pipe O.D.)
  • Fits 6” nominal steel pipe, all schedules (6.625” pipe O.D.)

Bollard Post Cover Colors

  • Yellow with your choice of stripe colors
  • Red with your choice of stripe colors
  • Blue with your choice of stripe colors
  • Black with your choice of stripe colors
  • Green with your choice of stripe colors

Product Description

Steel post and concrete bollards are an often-necessary part of parking lot or facility safety. But their natural look is bland and ugly, inconsistent installation means they’re often slightly different heights, and they will rust, crack, and crumble over time, looking even uglier.

RubberForm Plastic Bollard Covers look great, can complement your brand colors, and provide a uniform height to otherwise inconsistent bollard posts. We guarantee them for at least 5 years without cracking, warping, or spalling in any weather conditions: heat, cold, rain, ice, or snow.

Our Bollard Covers are so easy to install your grandparents could do it, and just as easy to remove and replace years later when your parking lot or road needs a little refresh. And Bollard Covers protect and prolong the life of the bollard post underneath too!

Our Bollard Covers are in-stock and ready to ship straight from our factory shelves. When measuring steel bollard posts for covers, we recommend adding 2-4 inches to accommodate inconsistent installation.

Models

RF-SB10E

  • SB-10 Speed Bump End Module
  • Two – Thermoplastic Safety yellow or white arrows
  • 4.1 lbs
  • 24″L x 10″W x 2-1/4″H

RF-SB10C

  • SB-10 Speed Bump Center Module
  • Two – Thermoplastic Safety yellow or white arrows
  • 5.75 lbs
  • 24″L x 10″W x 2-1/4″H

Key Features

  • Manufactured using a 1/8″ thick High Density Polyethylene (HDPE) with stronger intermolecular forces, tensile strength and solvent resistance
  • Contains ultraviolet and antistatic additives that withstand extreme temperatures and resist fading
  • Quick, easy installation and secure fit
  • Durable, flexible plastic designed to absorb impact
  • Protects both vehicles and structures from expensive damage
  • Two large, 2” recessed reflective stripes increase visibility and safety
  • Attractive – Low Cost

Hardware Kits

RF-SB10HWK – included with every section

  • 4 – Hex Lag Screws – Steel: 1/2”W x 4”L
  • 4 – Plastic Shield for Lag Screw: 3″L x 5/8″W
  • 4 – Flat Washers: 1/2”W x 1-1/16”L
  • 1 – Dual Flange Connector

FROM ONE SPECIALIST TO ANOTHER

Related products

Whether you need speed bumps, roofing support, curb ramps, or more, RubberForm specializes in safety and risk mitigation.

Portable Bollard Bases
Portable Bollard Bases
Our RubberForm Bollard Base Systems are effective traffic deterrents, barriers, and guides. Based on our portable sign bases, they’re light...
Learn More
Add to quote
Round Plastic Sign Post
Round Plastic Sign Post
Our RubberForm Round Plastic Sign Posts (also known as sign poles) are a friendly alternative to aluminum or square steel...
Learn More Choose Options

FREQUENTLY ASKED

What's the difference between your sign base and the plastic one I've seen for sale elsewhere?

The plastic knock-off you've seen is blow-molded, thin-walled plastic. That saves a lot of money for the manufacturer, but means it will break the first time it tips over or is ever so gently nudged by a vehicle. It also can crack open the first time it freezes, even without any collision. Our sign base won't tip over even in heavy wind, and won't chip, crack, crumble, or corrode in extreme weather or due to vehicle collision.

How portable are your sign bases?

They're so easy to move your grandparents could do it. Simply tip the base over on its bottom side edge and roll it into position (that's why our base is round!). Grab the top of the signpost and push/roll it into the top of the base. If you need a cart to move, we have two sign base carts: one for our 72-pound sign base and another for our 150-pound sign base w/base weight. No need for mounted wheels that will eventually rust or break off.

I need a heavier base than 72 lbs. for a high-wind area.

We have an add-on sign base weight for a total of 150 pounds (with the sign post). It also creates a wider base, making it less likely to tip.

Does your sign base come in colors?

We only make our sign base in black. However, we offer thermoformed plastic covers in safety yellow or handicap blue (as well as custom colors with a minimum order, depending on color) that snap right on top of the sign base for higher visibility.

What kind of sign posts can I use with your sign bases?

We have 2 signpost hole sizes: a 1-¾” perforated square sign post, and a 2-⅜“ round Schedule 40 thickness plastic post (or aluminum post with a minimum order, since we don’t normally stock them). We can also accommodate round posts smaller than 2-⅜“, just ask.

What post height do you recommend?

We recommend a 5’ signpost. This cuts down on the wind shear that might tip the sign base over in higher wind areas. If you require a taller post, we advise adding our 75-pound sign base weight that attaches to the bottom of our 72-pound sign base; this added sign base weight will enable you to go up to the MUCTD height of 7’ or 8’. You should also use a metal post for this application as plastic may flex in the wind.

What is the minimum quantity I can order?

Just one sign base! We can ship a boxed sign base out via FedEx or UPS ground to any location or up to 20 sign bases per pallet (bulk-packed, not boxed) via common carrier–LTL. We’ve also fabricated custom pallets for special orders, just ask!

What is the turnaround time to ship your sign base?

Our sign bases are usually in stock on the shelf and can be shipped out the following business day. Larger orders (greater than 1,000 sign bases) will take longer. Let us know your timetables and we’ll work to accommodate your delivery needs.

How many sign bases fit on a pallet?

We can ship up to 20 sign bases per pallet via common carrier–LTL (bulk-packed, not boxed).

Why are your sign bases round instead of octagonal?

Two reasons: our round sign bases can be rolled on their side, which is why we call them portable. Octagonal sign bases can't. But our round design is also more stable in high-wind conditions. The center of gravity is lower than any octagonal design we've seen. In side-by-side comparisons some of our customers have actually done, the round sign base always stays upright longer in heavy wind.