- Industrial
Rubber Rooftop Pavers
Product Description
RubberForm Rubber Rooftop Pavers make crossing or servicing equipment on a flat roof simple, even in the rain.
These 100% American recycled tire rubber pavers feel hard like concrete, but provide traction even when wet and can endure harsh weather conditions like heat, cold, rain, ice, and snow without cracking, crumbling, or corroding.
Keep rooftops, work areas, and walkways safe for you and your workers.
Specifications:
- 24”W x 30”L x 2”H per paver
- 40 lbs each
- Excellent drainage – .25” round standoffs
- Safe for rubber membranes
- Easy install
- 100% American Recycled Tire Crumb Rubber – SBR with polyurethane binder
- Interlocking design – dowels are available
- 100% Made in U.S.A. – complies with ARRA 2009 and Buy America Acts
PRODUCT DESCRIPTION
Flat roofs are unreliable to traverse, especially when wet. Footing is treacherous with or without a layer of gravel or stone on top. Leaving it up to chance puts you at risk of liability, injury, and lawsuits.
RubberForm Rubber Rooftop Pavers make navigating a flat rooftop simple. They’re lightweight, easy to install, and just as simple to remove and relocate. Our pavers are hard like concrete, maintaining good traction even when wet, and rubber standoffs allow water to quickly drain away from the walking path. Our 100% American recycled tire rubber is durable too, meaning it won’t chip, warp, or spall, whether in the searing heat of the summer sun or the frigid cold of North American winters, or any rain, ice, or snow.
MODELS
RF-RTP232
- 40 lbs
- 24”W x 30”L x 2”H
- 1/4” round standoffs
- Stand-offs on the bottom of each paver for drainage
- Safe for rubber membrane roof applications
- Available colors: black, charcoal gray, terra cotta, red
Key Features
- All-weather weighted rubber base, easy maintenance, will
not rust, chip, crack, crumble, corrode or need repainting - Resistant to extreme temperature variations, UV light and moisture
- Easy to install, easy to move by one person
- Leaves no standing water – inhibiting mold or mosquito nesting
- Satisfies legal requirements in some regions for walkway pads placement at access doors,
roof hatches, and near ladders, protecting roofing materials from unintended foot traffic - Enhances safety by designating the proper path around signs, skylights and vents
- Made in the USA with 100% durable recycled rubber
Hardware Kits
- 1/4″ dowel connectors (recommended)
RF-CLM-1.10.1BK
- Chem-Link M1 Adhesive 10.1 oz cartridge, black

ALL-AMERICAN MADE
High-quality products proudly manufactured entirely in the USA, supporting local craftsmanship and jobs.
100% Recycled Materials
Eco-friendly solutions crafted from fully recycled materials that promote responsible sustainability.
LEED CERTIFIED
Our products meet rigorous LEED standards, ensuring energy efficiency and sustainable building practices.
Family Owned
A trusted, family-run business dedicated to exceptional service, quality, and consumer satisfaction.