- Parking Lot Safety
- Public Sector
Rubber Speed Bumps (MLSB)
Product Description
Our RubberForm MLSB Speed Bumps are effective permanent or temporary traffic calming devices such as check points and construction zones. They are carefully innovated to stay in place: no spikes, no lag bolts, and no adhesives are needed for temporary use. For permanent installation, use our lags bolt and shield hardware kits.
They’re easy to install, easy to relocate, and highly visible day or night. Our MLSB speed bump line are 100% American recycled masticated rubber that won’t crack, crumble, or corrode, no matter the heat, cold, rain, ice, or snow you throw at it.
2.5in Speed Bump Spec Sheet (PDF)
Specifications:
- 3 MLSB speed bump heights available
- 2.5″, 3″, and 4″
- Dovetail interconnecting design allows for unlimited connectivity
- High-visibility reflectors or reflective yellow safety strips on speed bumps
- Dirt road models available with earth anchors or spikes
- Made in the USA with 100% masticated recycled rubber
Product Description
Most traffic calming methods are a huge pain. Concrete and asphalt speed bumps are difficult and time-consuming to install and maintain. They’re even harder to remove later when your needs change. They’re ugly, and when they chip, crack, and crumble (and they will), they stop working well–and somehow get uglier.
RubberForm MLSB Speed Bumps are blessedly easy and convenient. They’re simple to install and just as easy to remove or relocate later. If you do want to attach them permanently, you can. They’re fully modular, which means you can link them together to span any width needed. Their reflectors and safety reflective strips maintain high visibility at night, in fog, rain, or snow. They also come in variable heights, which means you can slow your target traffic down to as little as a stop to 3-5 miles per hour, or select a height designed to slow larger vehicles instead of personal vehicle traffic.
Our MLSB speed bumps are carefully innovated to withstand every possible environment you might want to install them in. They won’t melt in the searing summer sun or shatter in the frigid cold. They’re unaffected by rain, ice, or snow. Our 100% American recycled masticated rubber won’t chip, warp, or spall either.
Models
RF-MLSB2.5:
- 32 lbs
- 2.5″H x 18″W x 36″L
- 2 embedded, high visibility AASHTO two-way yellow reflectors
- 100% Fiber-reinforced masticated recycled tire rubber
RF-MLSB3:
- 35 lbs
- 3″H x 18″W x 36″L
- Optional high-visibility reflective yellow stripe
- 100% Fiber-reinforced masticated recycled tire rubber
RF-MLSB4:
- 40 lbs
- 4″H x 18″W x 36″L
- High-visibility reflective yellow stripe
- 100% Fiber-reinforced masticated recycled tire rubber
- Can be fabricated with 2” x 2” cable channel by request *see spec sheet for drawing
Key Features
- Easy to deploy, install, and recover
- Embedded high-visibility AASHTO reflectors (MLSB2.5)
- High-visibility reflective yellow stripe for low-light conditions (MLSB3 & MLSB4)
- Can be used on dirt or gravel roads – put in dirt road spec area
- Portable or Permanent – galvanized steel lag bolt and anchors for permanent installation
- Multiple configurations and unlimited connectivity
- Made in the USA with 100% masticated recycled rubber
Hardware Kits
RF-MLSBHWK
- 4 – Lag Bolts: 3/8”W x 5”L
- 4 – Washers: 3/8”W x 1”L
- 4 – Anchors
FROM ONE SPECIALIST TO ANOTHER
Related products
Whether you need speed bumps, roofing support, curb ramps, or more, RubberForm specializes in safety and risk mitigation.
