• Industrial

Rooftop Pavers

Product Description

Rubber membrane roofs can be a problem. They’re difficult to maintain. They’re treacherous to traverse on foot, particularly in the rain, ice, or snow. They also damage easily when exposed to harsh weather conditions, particularly when ice, snow, or other debris falls off broadcast dishes, antennas, water tanks, and other typical roof fixtures. RubberForm® Rooftop Pavers make protecting or traversing a flat roof remarkably simple, especially in harsh weather.

Keep rooftops, work areas, and walkways protected from damage and safe for you and your workers.

Add to quote

Specifications:

  • 24 in. W x 24 in. L x 1 in. H
  • 18 lbs.
  • 1/4 in. round standoffs
  • Available colors: Onyx Black, Storm Gray, & Gunmetal (other colors available upon request)
  • Safe – Provides a walkway for workers or customers traversing your roof
  • Simple – To install, remove, and relocate
  • Protection – Protects your roof from extreme weather damage (like falling ice, snow, or other debris from roof installations)
  • Durable – Won’t crack, chip, crumble, or corrode
  • Made in the USA –  With 100% American recycled crumb rubber

Download Spec Sheet

Download

PRODUCT DESCRIPTION

Flat roofs are unreliable to traverse, especially when wet. Footing is treacherous with or without a layer of gravel or stone on top. Leaving it up to chance puts you at risk of liability, injury, and lawsuits.

RubberForm® Rooftop Pavers make navigating a flat rooftop simple. They’re lightweight (even lighter than they used to be), easy to install, and just as simple to remove and relocate. Our pavers maintain good traction even when wet and have rubber standoffs that allow water to quickly drain away from the walking path. Our 100% American recycled tire rubber is durable too, meaning it won’t chip, warp, or spall, whether in the searing heat of the summer sun or the frigid cold of North American winters, or any rain, ice, or snow. 

MODELS

RF-RTP122

  • 24 in. W x 24 in. L x 1 in. H
  • 18 lbs.
  • 1/4 in. round standoffs
  • Channels underneath for easy drainage
  • Safe for rubber membrane roof applications
  • Available colors: Onyx Black, Storm Gray, & Gunmetal
  • Other colors available upon request, minimum quantity required

Key Features

  • Resistant to extreme temperature variations, UV light and moisture
  • Connect multiple pavers easily with connector block
  • No adhesive needed (but can use if desired–contact our product specialist for more info)
  • Made in the USA with 100% recycled crumb rubber
  • Complies with ARRA 2009 and Buy America Acts

Hardware Kits

  • Paver Connector Block (made with recycled rubber)

RF-CLM-1.10.1BK

  • Chem-Link M1 Structural Adhesive – 10.1 oz cartridge, black, no VOCs
dark_bg.jpg

DURABLE PRODUCTS
TO MEET EVERY SAFETY NEED

About Us

ALL-AMERICAN MADE

High-quality products proudly manufactured entirely in the USA, supporting local craftsmanship and jobs.

100% Recycled Materials

Eco-friendly solutions crafted from fully recycled materials that promote responsible sustainability.

LEED CERTIFIED

Our products meet rigorous LEED standards, ensuring energy efficiency and sustainable building practices.

Family Owned

A trusted, family-run business dedicated to exceptional service, quality, and consumer satisfaction.

FROM ONE SPECIALIST TO ANOTHER

Related products

Whether you need speed bumps, roofing support, curb ramps, or more, RubberForm® specializes in safety and risk mitigation.

Recycled Aluminum Signs
Recycled Aluminum Signs
Our RubberForm® Recycled Aluminum Signs are one step toward the best-looking parking lot for miles around, especially when used with...
Learn More
Add to quote
Engineered Trench Guard
Engineered Trench Guard
Our RubberForm® Engineered Trench Guard (ETG) provides side protection for precast concrete utility trench systems, like the Plastibeton® Channel System...
Learn More
Add to quote
Traffic Island Meridian System
Traffic Island Meridian System
Our RubberForm® Traffic Island Meridian System outlasts and outperforms any concrete curb. It’s easy to install (permanent or temporary) and...
Learn More
Add to quote

FREQUENTLY ASKED

How are the roof pavers held together?

RubberForm® uses barbed pins to hold together on each side, 2 pins per side. No tongue and grove like the competition as these will potato chip and curl up on the sides and come apart.

How much does your 20” x 30” x 2” thick, 5 sq. ft. paver weight?

X.X pounds per square foot. Concrete is 25 pounds per square foot. Total wight per paver is XX pounds.

How do you handle drainage, so water will drain off the roof?

RubberForm® molds in 3/8” stand-offs on the bottom side of the recycled rubber paver. When you install make sure there is a small gap in between each paver for drainage and expansion. Do not tightly install next to a wall, make sure there is room for expansion and contraction.

I see a lot of rubber pavers and playground molded rubber tiles, what makes yours different?

RubberForm®’s roof paver is made specifically for the roofs and molded where there is little to no porosity in the rubber for water or the elements to infiltrate.

What sizes do your rubber roof and patio pavers come in?

RubberForm® offers roof pavers that are 24” x 30” (5 sq. ft.) available in 2” thick with stand-offs on the bottom so water will drain underneath them.

Are your rubber pavers flexible and soft?

Yes. We mold them with course and fine recycled scrap tire rubber, so they will contour to the roof surface and be soft on foot traffic.
Please request a sample piece to see the RubberForm® difference for yourself!

What makes your rubber pavers different from other pavers and playground molded rubber tiles?

RubberForm®’s roof paver is made specifically for roofs and molded where there is no porosity in the rubber for water or other elements to infiltrate.

What colors do your roof pavers come in?

Our most common colors are black, gray, and special orders for terra cotta red and other custom colors upon request.