Skip to content
Share
Share on facebook
Share on whatsapp
Share on google
Share on twitter
Share on email
RubberForm durability
0%
RubberForm Price
0%

Rubber Speed Bumps (MLSB)

Our MLSB Series Speed Bumps are the only speed bumps available on the market that can be used as a free-standing or permanent device to slow down vehicle speeds. The unique design enables them to stay in place without the use of spikes, lag bolts, and/or adhesives.

  • 3 heights available
    • 2.5″, 3″, and 4″
  • Dovetail interconnecting design allows for unlimited connectivity
  • High-visibility reflectors or reflective yellow safety strips on speed bumps
  • Dirt road models available
  • Made in the USA with 100% masticated recycled rubber

Product Description

RubberForm’s MLSB Series Speed Bumps are the only speed bump available on the market that can be used as a free-standing or permanent device to slow down vehicle speeds. The unique design enables them to stay in place without the use of spikes, lag bolts, and/or adhesives. Simply put them down and link them together.

For permanent or semi-permanent installation, there are several hardware options available that allow you to install our speed bumps on any asphalt, concrete, dirt or gravel surface. Each portable rubber speed bump features a dovetail design that allows unlimited custom connectivity. Choose the height you need to slow traffic to your desired speed – as slow as 3-5 mph.

Each speed bump is manufactured with solid, masticated recycled rubber to withstand extreme temperatures, constant U.V. light, extreme weather conditions, and of course, high traffic volume.

The RubberForm MLSB 2.5” Rubber Speed Bump is targeted to reduce traffic speeds below 10 mph.  It is the ideal choice for parking lots, guarded gate entrances or exits, construction sites, school drop-off or pick-up areas, traffic stops, or anywhere a permanent or temporary traffic control device needed.

The RubberForm MLSB 3” Rubber Speed Bump is one of the most aggressive traffic calming products for pedestrian vehicles on the market, designed to slow traffic to 3-5 mph. Our 3” Speed Bump has been successfully used by police and fire departments, Border Patrol, Homeland Security, and Military Units for traffic check points. It is the ideal choice for anywhere an aggressive traffic calming device is temporarily or permanently needed traffic stops, guarded entrances or exits, or construction sites.

The RubberForm MLSB 4″ Rubber Speed Bump was designed for use on construction sites and trucks (not recommended for pedestrian or personal vehicle use). Designed to slow traffic to 3-5 mph, they can be temporarily deployed and easily recovered whenever and wherever you need them.

Interested in other Speed Bump options? Follow the links here:

Models

RF-MSLB2.5:

  • 32 lbs
  • 2.5″H x 18″W x 36″L
  • 2 embedded, high visibility AASHTO two-way yellow reflectors
  • 100% Fiber-reinforced masticated recycled tire rubber

RF-MLSB3:

  • 35 lbs
  • 3″H x 18″W x 36″L
  • Optional high-visibility reflective yellow stripe
  • 100% Fiber-reinforced masticated recycled tire rubber

RF-MLSB4: 

  • 40 lbs
  • 4″H x 18″W x 36″L
  • High-visibility reflective yellow stripe
  • 100% Fiber-reinforced masticated recycled tire rubber
  • Can be fabricated with 2” x 2” cable channel by request *see spec sheet for drawing

Hardware Kits

RF-MLSBHWK

  • 4 – Lag Bolts: 3/8”W x 5”L
  • 4 – Washers: 3/8”W x 1”L
  • 4 – Anchors

RF-RBR14HDG

  • 14” Galvanized Forged Mounting Spike with Cap

RF-RBR24/36

  • 24” or 36” rebar spike for dirt and gravel road installation

RF-DREA14

  • 14” dirt road earth anchor with drive flat top
  • 1.5″ tapped hole depth for threaded bolt
    • bolt, nut, and washer included
  • Installs with 1-3/8″ socket

Key Features

  • Easy to deploy, install, and recover
  • Embedded high-visibility AASHTO reflectors (MLSB2.5)
  • High-visibility reflective yellow stripe for low-light conditions (MLSB3 & MLSB4)
  • Can be used on dirt or gravel roads
  • Portable or Permanent – stainless steel lag bolt and anchors for permanent installation
  • Multiple configurations and unlimited connectivity
  • Made in the USA with 100% masticated recycled rubber

100% Recycled Materials

Manufactured with only post-consumer or post-industrial materials.

UV Resistant - All Weather!

All-weather product - won’t crack, crumble or rust!

Made in the USA

Feel good about buying products manufactured in the US and from US materials.

BuildingGreen Listed

Achieve your sustainability goals with LEED points.

Quote List

No products in the list