What is the reflective material on your speed bumps?

We use AASHTO approved yellow reflectors, 2 on our MLSB2.5. On our MLSB3, we use a high prismatic reflective metal strip. We have found this to be a far more durable solution than the fabric road tape that many other manufacturers use. If our reflector breaks in our MLSB2.5 or the reflective metal strip comes off the MLSB3, they can easily be replaced, just call us.

Can I install your speed bumps on a gravel road?

Yes, you can install our MLSB line of speed bumps on gravel with (recommended) an earth anchor mounting system or a 14” rebar spike. These spikes and earth anchor screws will need to be checked and re-secured periodically.

How are your speed bumps anchored down?

We offer a lag bolt anchor mounting system consisting of a lag bolt, plastic lag shield, and washer to anchor into pavement or concrete. There are 4 anchor holes for each MLSB section and SB-10 section. For temporary situations, you can just simply lay the MLSB down.

What are the dimensions of the MLSB?

All our MLSB model sections are 18” wide x 36” long. The MLSB2.5 is 2.5” high and slows traffic to 5-10 mph. The MLSB3 is 3” high and slows traffic to 5 mph. The MLSB4 is 4” high and slows traffic to 2-5 mph (passing vehicles will need at least 4” of ground clearance). We can create what we call “flush ends” for a finished look, just ask.

What is the turnaround time for your speed bumps and speed humps?

Our speed bumps and speed humps are usually in stock and can be shipped out the following day. Larger orders (greater than 100 units) will take longer. Let us know your project timeline and we’ll work to accommodate your delivery needs.

Can we remove your speed bumps or speed humps for the winter when our snowplows are on the roads?

Yes, if you need to remove them for the winter, just unbolt and store for the season. If needed, seal the holes with any silicone-based material so water, dirt, and rocks do not get lodged in them.

Are your speed bumps and speed humps truly made in the USA?

We are the only true U.S. manufacturer of recycled composite plastic speed bumps and speed humps. We source all our recycled materials domestically, which means we're helping clean up our backyard. We also design and manufacture all our products right here in Western New York, because we believe in American ingenuity and hardworking American hands.

94fb7dddcb8257e0dc08c7d58cd6ea86e9294b2e

EXPLORE OUR
PRODUCT LINES

Whether you need speed bumps, roofing support, curb ramps, or more, RubberForm specializes in safety and risk mitigation.

Products

Search Results:

Speed Cushion

RubberForm Speed Cushions are traffic calming devices and effective alternatives to asphalt and concrete speed humps or radar signs. Speed...

Learn More

Add to quote

SH-36" Speed Hump

Our RubberForm Speed Humps are effective permanent or temporary traffic calming devices. Speed Humps are gentler than speed bumps, so...

Learn More Choose Options

1" Pipe and Hose Ramp

Our redesigned and engineered RubberForm Pipe and Hose Ramps (also known as protector ramps, crossover ramps, bypass ramps, or waterline...

Learn More

Add to quote

Spill Containment Berms

RubberForm Spill Containment Berms (also called spill containment dikes) mechanically isolate areas and contain spills without resorting to immovable concrete...

Learn More

Add to quote

Rubber Rooftop Pavers

RubberForm Rubber Rooftop Pavers make crossing or servicing equipment on a flat roof simple, even in the rain. These 100%...

Learn More

Add to quote

2" Pipe and Hose Ramp

Our redesigned and engineered RubberForm Pipe and Hose Ramps (also known as protector ramps, crossover ramps, bypass ramps, or waterline...

Learn More

Add to quote

Mini Roundabouts

Our RubberForm Mini Roundabouts (or mini-RABs, also known as traffic circles) can dramatically reduce collisions and improve traffic flow. Take...

Learn More

Add to quote

Wedge Ramps

Our RubberForm Wedge Ramps are an effective alternative to using gravel or asphalt to transition over uneven surfaces during a...

Learn More Choose Options

Shopping Cart Corral Bump

Our RubberForm Shopping Cart Corral Bump keeps shopping carts where they belong till your customers need them: in the cart...

Learn More Choose Options

Square Steel Perforated Sign Post

Our RubberForm Square Steel Perforated Sign Post (also known as a sign pole or Telespar) is one step toward the...

Learn More Choose Options

Portable Fillable Sign Base

Our RubberForm Fillable Sign Base is a wallet-friendly solution to portable signage needs. Designed from our original solid recycled rubber...

Learn More Choose Options

SB-10 Speed Bump

Our RubberForm SB-10 Speed Bumps are effective permanent or temporary traffic calming devices, ideal for reducing vehicle speeds under 10...

Learn More Choose Options

EXPLORE OUR PRODUCT LINES

Products

EXPLORE OUR
PRODUCT LINES